NETGEAR Managed Switches Software Administration Manual, Release 8.0
•
In the Network Mask field, enter 255.255.0.0.
•
Select Enablein the Admin Mode field.
d. Click Apply to save the settings.
3. Enable VRRP on the 1/0/4.
a.
From the main menu, select Routing > VRRP > Basic> VRRP Configuration. A screen similar to
the following displays.
Figure 10-7
b. Under Global Configuration, next to the Admin Mode, select Enable radio button.
c.
Enter the following information in the Virtual Router Configuration:
•
In the VRID(1 to 255) field, enter 20.
•
Select 1/0/4 in the Interface field.
•
In the Priority(1 to 255), enter 254.
•
In the Primary IP Address, enter 192.150.2.1.
•
Select Active in the Status field.
d. Click Add to save the settings.
10-7
v1.0, October 2009
Virtual Router Redundancy Protocol