NETGEAR Managed Switches Software Administration Manual, Release 8.0
Interface 1/0/1
Sflow collector
IP addres: 192.168.10.2
Figure 20-6
CLI: Configuring Statistical Packet-Based Sampling of Packet Flows with
sFlow
Configure the sFlow receiver (sFlow collector) IP address. In this example, sFlow samples will be sent to the
destination address 192.168.10.2.
(Netgear Switch) (Config)# sflow receiver 1 ip 192.168.10.2
Configure the sFlow receiver timeout. Here sFlow samples will be sent to this receiver for the duration of
31536000 seconds. That is approximately one year.
(Netgear Switch) (Config)# sflow receiver 1 owner NetMonitor timeout 31536000
SNMP
PC
Interface
1/0/2
GSM73xxS
Uplink
interface
1/0/24
Switch/Router
v1.0, October 2009
Interface 1/0/3
PC
20-6