NETGEAR Managed Switches Software Administration Manual, Release 8.0
7.
Enable OSPFv3 on the interface 1/0/1 and 1/0/13.
a.
From the main menu, select Routing > OSPFv3 >Advanced > Interface Configuration. A screen
similar to the following displays.
Figure 30-8
b. Under OSPFv3 Interface Configuration, scroll down to interface 1/0/1 and select the checkbox for
1/0/1. Then select the checkbox for 1/0/13.
c.
In the OSPFv3 Interface Configuration, select Enable in the Admin Mode field.
d. Click Apply to save the settings.
8. Enable multicast globally.
a.
From the main menu, select Routing > Multicast >Global Configuration. A screen similar to the
following displays.
Figure 30-9
30-9
v1.0, October 2009
MLD