NETGEAR Managed Switches Software Administration Manual, Release 8.0
e.
Under the Diffserv Class Configuration page, enter the following information:
•
In the Source IP Address field, enter 172.16.30.0.
•
In the Source Mask field, enter 255.255.255.0.
f.
Click Apply.
5.
Create class development_dept.
a.
From the main menu, select QoS > DiffServ >Advanced >Class Configuration. A screen similar to
the following displays.
Figure 13-9
b. Enter the following information in the Class Configuration
•
In the Class Name field, enter development_dept.
•
Select the All in the Class Type field.
c.
Click the Add to create a new class development_dept.
d. Click the development_dept to configure this class.
13-9
v1.0, October 2009
Differentiated Services