NETGEAR FSM7328SNA Administration Manual page 200

NETGEAR Managed Switches Software Administration Manual, Release 8.0
Deny all the traffic which has destination MAC 01:80:c2:xx:xx:xx.
(Netgear Switch) (Config-mac-access-list)#deny any 01:80:c2:00:00:00
00:00:00:ff:ff:ff
Permit all the other traffic.
(Netgear Switch) (Config-mac-access-list)#permit any
(Netgear Switch) (Config-mac-access-list)#exit
Apply the MAC ACL acl_bpdu to the port 1/0/2.
(Netgear Switch) (Config)#interface 1/0/2
(Netgear Switch) (Interface 1/0/2)#mac access-group acl_bpdu in
Web Interface: Setting up a MAC ACL with Two Rules
To use the Web interface to configure MAC ACL on a port on the switch, proceed as follows:
1. Create MAC ACL 101 on the switch:
a. From the main menu, select Security > ACL > MAC ACL. A screen similar to the following
displays.
Figure 11-44
b. In the Name field, enter acl_bpdu.
c. Click Add to create ACL acl_bpdu.
2. Create a new rule associated with the ACL acl_bpdu.
11-40
v1.0, October 2009
Access Control Lists (ACLs)