NETGEAR Managed Switches Software Administration Manual, Release 8.0
a.
From the main menu, select Routing > IP >Advanced > IP Interface Configuration. A screen
similar to the following displays.
Figure 28-43
b. Under IP Interface Configuration, scroll down to interface 1/0/9 and select teh checkbox for 1/0/9.
Now 1/0/9 appears in the Interface field at the top.
c.
Enter the following information in the IP Interface Configuration:
•
In the IP address, enter 192.168.3.1.
•
In the Subnet Mask, enter 255.255.255.0.
•
Select Enable in the Routing Mode field.
d. Click Apply.
4.
Configure 1/0/13 as a routing port and assign IP address to it.
a.
From the main menu, select Routing > IP >Advanced > IP Interface Configuration. A screen
similar to the following displays.
PIM
v1.0, October 2009
28-34