NETGEAR FSM7328SNA Administration Manual page 299

NETGEAR Managed Switches Software Administration Manual, Release 8.0
Netgear Switch) (Config)#radius server key auth 10.100.5.17
Enter secret (16 characters max):123456
Re-enter secret:123456
To configure the shared secret between the RADIUS client and the server.
(Netgear Switch) (Config)#radius server msgauth 10.100.5.17
(Netgear Switch) (Config)# radius server primary 10.100.5.17
To set the RADIUS server as a primary server.
(Netgear Switch) (Config)#radius accounting mode
(Netgear Switch) (Config)#radius server host acct 10.100.5.17
To configure a accounting server.
(Netgear Switch) (Config)#radius server key acct 10.100.5.17
Enter secret (16 characters max):123456
Re-enter secret:123456
To configure the shared secret between the accounting server and the client.
Web Interface: Authenticating dot1x Users by a RADIUS Server
1. Enable routing for the switch.
a. From the main menu, select Routing > Basic >IP Configuration. A screen similar to the following
displays.
Figure 15-13
b. Next to the Routing Mode, select the Enable radio button.
c. Click Apply to save the settings.
2. Assign IP address 192.168.1.1/24 to the interface 1/0/1
a. From the main menu, select Routing > Advanced >IP Interface Configuration. A screen similar to
the following displays.
Security Management
v1.0, October 2009
15-15