NETGEAR FSM7328SNA Administration Manual page 552

NETGEAR Managed Switches Software Administration Manual, Release 8.0
a. From the main menu, select Security > Control >Captive Portal> CP Configuration. A screen
similar to the following displays.
Figure 32-2
b. Under Captive Portal Configuration, scroll down to CP ID 1 and select the CP 1 checkbox. Now
CP 1appears in the CP ID field at the top.
c. In the Captive Portal Configuration, select Enable in the Admin Mode field.
d. Click Apply to save the settings.
3. Enable CP 1 on the interface 1/0/1.
a. From the main menu, select Security > Controls >Captive Portal > CP Binding Configuration. A
screen similar to the following displays.
Figure 32-3
b. Select 1 from the CP ID field.
c. Click the Unit 1. The Ports display.
d. Click the gray box under port 1.
e. Click Apply.
32-4
v1.0, October 2009
Captive Portal