NETGEAR FSM7328SNA Administration Manual page 454

7000 series managed switch administration guide for software version 8.0

Table of Contents

NETGEAR Managed Switches Software Administration Manual, Release 8.0

Figure 28-13

b. Under IP Interface Configuration, scroll down to interface 1/0/10 and select the checkbox for 1/0/

10. Now 1/0/10 appears in the Interface field at the top.

Enter the following information in the IP Interface Configuration.

In the IP address, enter 192.168.3.2.

In the Subnet Mask, enter 255.255.255.0.

Select Enable in the Routing Mode.

d. Click Apply to save the settings.

Configure 1/0/11 as a routing port and assign IP address to it.

From the main menu, select Routing > IP >Advanced > IP Interface Configuration. A screen

similar to the following displays.

Figure 28-14

b. Under IP Interface Configuration, scroll down to interface 1/0/11 and select the checkbox for 1/0/

11. Now 1/0/11 appears in the Interface field at the top.

Enter the following information in the IP Interface Configuration.

In the IP address, enter 192.168.5.1.

v1.0, October 2009