NETGEAR FSM7328SNA Administration Manual page 153

NETGEAR Managed Switches Software Administration Manual, Release 8.0
CLI: ip proxy-arp
(Netgear Switch) (Interface 0/24)#ip proxy-arp ?
<cr>
(Netgear Switch) (Interface 0/24)#ip proxy-arp
Web Interface: Configuring Proxy ARP on a Port
To use the Web interface to configure proxy ARP on a port, proceed as follows:
1. Configure proxy ARP.
a. From the main menu, select Routing > IP > Advanced> IP Interface Configuration. A screen
similar to the following displays.
Figure 9-1
b. Under IP Interface Configuration, scroll down to interface 1/0/3 and select the checkbox for that
interface. Now 1/0/3 appears in the Interface field at the top.
c. Select the Enable in the Proxy Arp field.
d. Click Apply to save the settings.
Proxy Address Resolution Protocol (ARP)
Press Enter to execute the command.
v1.0, October 2009
9-2