NETGEAR Managed Switches Software Administration Manual, Release 8.0
a.
From the main menu, select Routing > Multicast >PIM-DM->Interface Configuration. A screen
similar to the following displays.
Figure 30-11
b. Under PIM-DM Interface Configuration, scroll down to interface 1/0/1 and select the checkbox for
1/0/1. Then select the checkbox for 1/0/13.
c.
In the PIM-DM Interface Configuration, select Enable in the Admin Mode field.
d. Click Apply to save the settings.
On Switch B:
To use the Web interface to config MLD, proceed as follows:
1.
Enable IP routing on the switch.
30-11
v1.0, October 2009
MLD