NETGEAR FSM7328SNA Administration Manual page 495

NETGEAR Managed Switches Software Administration Manual, Release 8.0
d. Click Apply.
7. Enable rip on the interface 1/0/24.
a. From the main menu, select Routing > RIP >Advanced > Interface Configuration. A screen similar
to the following displays.
Figure 28-77
b. Select 1/0/24 in the Interface field.
c. Next to the RIP Admin Mode, select the Enable radio button.
d. Click Apply.
8. Enable multicast globally.
a. From the main menu, select Routing > Multicast >Global Configuration. A screen similar to the
following displays.
Figure 28-78
b. Next to the Admin Mode, select the Enable radio button.
c. Click Apply.
PIM
v1.0, October 2009
28-54