NETGEAR FSM7328SNA Administration Manual page 434

NETGEAR Managed Switches Software Administration Manual, Release 8.0
c. Next to the IPv6 Forwarding, select the Enable Radio button.
d. Click Apply.
2. Enable IPv6 routing on the interface 1/0/1
a. From the main menu, select Routing > IPv6 >Advanced>Interface Configuration. A screen similar
to the following displays.
Figure 27-2
b. Under IPv6 Interface Configuration, scroll down to interface 1/0/1 and select the checkbox for
1/0/1. Now 1/0/1appears in the Interface field at the top.
c. In the IPv6 Interface Configuration, select Enable in the IPv6 Mode field.
d. Click Apply to save the settings.
3. Assign an IPv6 address to the routing interface.
a. From the main menu, select Routing > IPv6 >Advanced>Prefix Configuration. A screen similar to
the following displays.
Figure 27-3
b. Select 1/0/1 in the Interface field
c. In the IPv6 Prefix field, enter 2000::2.
d. In the Length field, enter 64.
27-3
v1.0, October 2009
IPv6 Interface Configuration