NETGEAR FSM7328SNA Administration Manual page 467

NETGEAR Managed Switches Software Administration Manual, Release 8.0
a. From the main menu, select Routing > Multicast >PIM-DM->Interface Configuration. A screen
similar to the following displays.
Figure 28-37
b. Under PIM-DM Interface Configuration, scroll down to interface 1/0/21 and select the checkbox
for 1/0/21. Then select the 1/0/22 and 1/0/24.
c. Enter the following information in the PIM-DM Interface Configuration.
• Select Enable in the Admin Mode field.
d. Click Apply to save the settings.
11. Enable IGMP globally.
a. From the main menu, select Routing > Multicast >IGMP->Global Configuration. A screen similar
to the following displays.
Figure 28-38
b. Next to the Admin Mode, select the Enable radio button.
c. Click Apply.
12. Enable IGMP on the interface 1/0/24.
PIM
v1.0, October 2009
28-26