NETGEAR FSM7328SNA Administration Manual page 413

NETGEAR Managed Switches Software Administration Manual, Release 8.0
b. In the VLAN Membership, select 200 in the VLAN ID field.
c. Click the Unit 1. The Ports display.
d. Click the gray box under port 6 , 7, 16 and 17 until U displays. The U specifies that the egress
packet is untagged for the port.
e. Click Apply.
3. Specify the pvid on port 1/0/6, 1/0/7, 1/0/16 and 1/0/17.
a. From the main menu, select Switching > VLAN> Advanced > Port PVID Configuraton. A screen
similar to the following displays.
Figure 24-4
b. Under PVID Configuration, scroll down to interface 1/0/6,1/0/7,1/0/16 and 1/0/17 and select the
checkbox for that interface.
c. Under PVID Configuration, enter 200 in the PVID(1 to 4093) field.
d. Under PVID Configuration, select Admit All in the Acceptable Frame Type field.
e. Click Apply to save the settings.
4. Create a private group, group1.
a. From the main menu, select Security > Traffic Control> Private Group VLAN > Private Group
Private VLAN Groups
v1.0, October 2009
24-4