NETGEAR FSM7328SNA Administration Manual page 180

NETGEAR Managed Switches Software Administration Manual, Release 8.0
11. Apply ACL 101 to port 44.
a. From the main menu, select Security > ACL > Advanced > IP Binding Configuration. A screen
similar to the following displays.
Figure 11-20
b. Under Binding Configuration, make the following selection and enter the following information:
• Select 101 in the ACL ID field.
• In the Sequence Number field, enter 1.
c. Click Unit 1. The ports display.
d. Click on the gray box under port 44. A flag appears in the box.
e. Click Apply to save the settings.
12. Apply ACL 102 to port 44.
a. From the main menu, select Security > ACL > Advanced > IP Binding Configuration. A screen
similar to the following displays.
11-20
v1.0, October 2009
Access Control Lists (ACLs)