NETGEAR Managed Switches Software Administration Manual, Release 8.0
c.
Enter the following information in the IP Interface Configuration.
•
In the IP address, enter 192.168.4.1.
•
In the Subnet Mask, enter 255.255.255.0.
•
Select Enable in the Routing Mode field.
d. Click Apply to save the settings.
4. Enable IP multicast on the switch.
a.
From the main menu, select Routing > Multicast >Global Configuration. A screen similar to the
following displays.
Figure 31-12
b. Next to the Admin Mode, select the Enable radio button.
c.
Click Apply.
5.
Enable DVMRP on the switch.
31-14
v1.0, October 2009
DVMRP