NETGEAR FSM7328SNA Administration Manual page 439

NETGEAR Managed Switches Software Administration Manual, Release 8.0
b. In the VLAN ID field, enter 500.
c. Select Static in the VLAN Type field.
d. Click Add.
2. Add ports to the VLAN 500.
a. From the main menu, select Switching > VLAN >Advanced > VLAN Membership. A screen
similar to the following displays.
Figure 27-7
b. Select 500 in the VLAN ID field.
c. Click the Unit 1. The Ports display.
d. Click the gray box under port 1 until U displays, indicating the egress packet is untagged for the
port.
e. Click Apply.
3. Specify that PVID on port 1/0/1.
a. From the main menu, select Switching > VLAN> Advanced > Port PVID Configuration. A screen
similar to the following displays.
Figure 27-8
IPv6 Interface Configuration
v1.0, October 2009
27-8