NETGEAR Managed Switches Software Administration Manual, Release 8.0
6.
Enable rip on the interface 1/0/9.
a.
From the main menu, select Routing > RIP >Advanced > Interface Configuration. A screen similar
to the following displays.
Figure 28-46
b. Select 1/0/9 in the Interface field.
c.
Next to the RIP Admin Mode, select the Enable radio button.
d. Click Apply.
7.
Enable rip on the interface 1/0/13.
a.
From the main menu, select Routing > RIP >Advanced > Interface Configuration. A screen similar
to the following displays.
Figure 28-47
b. Select 1/0/13 in the Interface field.
c.
Next to the RIP Admin Mode, select the Enable radio button.
d. Click Apply.
8.
Enable multicast globally.
PIM
v1.0, October 2009
28-36