NETGEAR FSM7328SNA Administration Manual page 504

NETGEAR Managed Switches Software Administration Manual, Release 8.0
d. Click Apply to save the settings.
4. Enable DHCP L2 Relay on VLAN 200.
a. From the main menu, select System > Services> DHCP L2 Relay > DHCP L2 Relay Configuration.
A screen similar to the following displays.
Figure 29-5
b. Select the Enable radio button next to the Admin Mode.
c. Under DHCP L2 Relay VLAN Configuration, scroll down to VLAN ID 200 and select the
checkbox for VLAN 200.
d. Enter the following information in the DHCP L2 Relay VLAN Configuration.
• Select Enable in the Admin Mode field.
• Select Enable in the Circuit ID Mode field.
• In the Remote ID String field, enter rmt_id.
e. Click Apply to save the settings.
5. Enable DHCP L2 Relay on interface 1/0/4,1/0/5 and 1/0/6.
a. From the main menu, select System > Services> DHCP L2 Relay > DHCP L2 Relay Interface
Configuration. A screen similar to the following displays.
29-5
v1.0, October 2009
DHCP L2 Relay