NETGEAR Managed Switches Software Administration Manual, Release 8.0
Figure 11-18
b. Under IP Extended Rules, select 102 in the ACL ID field.
c.
Click Add. The Extended ACL Rule Configuration screen displays.
Figure 11-19
d. Under Extended ACL Rule Configuration (100-199), enter the following information and make the
following selections:
•
In the Rule ID field, enter 1.
•
Next to Action mode, select the Permit radio button.
•
Select False in the Match Every field.
•
Select IP in the Protocol Type field.
e.
Click Apply to save the settings.
Access Control Lists (ACLs)
v1.0, October 2009
11-19