NETGEAR FSM7328SNA Administration Manual page 417

NETGEAR Managed Switches Software Administration Manual, Release 8.0
a. From the main menu, select Switching > STP > STP Configuration. A screen similar to the
following displays.
Figure 25-1
b. Enter the following information in the STP Configuration.
• Next to the Spanning Tree Admin Mode, select the Enable radio button.
• Next to the Force Protocol Version, select the IEEE 802.1d radio button.
c. Click Apply.
2. Configure CST Port Configuration.
a. From the main menu, select Switching > STP > CST Port Configuration. A screen similar to the
following displays.
Figure 25-2
Spanning Tree Protocol
v1.0, October 2009
25-2