NETGEAR FSM7328SNA Administration Manual page 198

NETGEAR Managed Switches Software Administration Manual, Release 8.0
Figure 11-42
b. Under Binding Configuration, make the following selection and enter the following information:
• Select 101 in the ACL ID field.
• In the Sequence Number field, enter 1.
c. Click Unit 1. The ports display.
d. Click on the gray box under port 48. A flag appears in the box.
e. Click Apply to save the settings.
13. Apply ACL 103 to port 24 and port 48:
a. From the main menu, select Security > ACL > Advanced > IP Binding Configuration. A screen
similar to the following displays.
11-38
v1.0, October 2009
Access Control Lists (ACLs)