NETGEAR Managed Switches Software Administration Manual, Release 8.0
a.
From the main menu, select Routing >IP >Basic >IP configuration. A screen similar to the
following displays.
Figure 30-12
b. Next to the Routing Mode, select the Enable radio button.
c.
Click Apply.
2.
Enable IPv6 Unicast routing on the switch.
a.
From the main menu, select Routing >IPv6 >Basic >Global configuration. A screen similar to the
following displays.
Figure 30-13
b. Next to the IPv6 Unicast Routing, select the Enable radio button.
c.
Click Apply.
3. Configure 1/0/21 and 1/0/24 as a IPv6 routing port.
MLD
v1.0, October 2009
30-12