NETGEAR Managed Switches Software Administration Manual, Release 8.0
4.
Bind the ACL with the interface 1/0/1.
a.
From the main menu, select Security > ACL > Advanced > IP Binding Configuration. A screen
similar to the following displays.
Figure 11-56
b. Enter Sequence Number as 1.
c.
Click Unit 1 in the Port Selection Table to display all the ports for the device.
d. Select the Port 1 checkbox.
e.
Click Apply. At the end of this configuration a screen similar to the following displays.
Figure 11-57
11-48
v1.0, October 2009
Access Control Lists (ACLs)