NETGEAR FSM7328SNA Administration Manual page 57

NETGEAR Managed Switches Software Administration Manual, Release 8.0
2. Assign all of the ports to VLAN 2000.
a. From the main menu, select Switching > VLAN >Advanced > VLAN Membership. A screen
similar to the following displays.
Figure 3-21
b. Select 2000 in the VLAN ID field.
c. Click the Unit 1. The Ports display.
d. Click the gray box before the Unit 1 until U displays.
e. Click Apply.
3. Associate the IP subnet with VLAN 2000.
a. From the main menu, select Switching > VLAN >Advanced->IP Subnet Based VLAN. A screen
similar to the following displays.
Figure 3-22
b. Enter the following information in the IP Subnet Based VLAN Configuration.
• In the IP Address field, enter 10.100.0.0.
• In the Subnet Mask field, enter 255.255.0.0.
• In the VLAN (1 to 4093) field, enter 2000.
c. Click Add.
Virtual LANs
v1.0, October 2009
3-18