NETGEAR Managed Switches Software Administration Manual, Release 8.0
4.
Create a 6-in-4 tunnel interface.
a.
From the main menu, select Routing > IPv6 >Advanced>Tunnel Configuration. A screen similar to
the following displays.
Figure 26-5
b. Select 0 in Tunnel Id field.
c.
Select 6-in-4-configured in the Mode field.
d. In the Source Address field, enter 192.168.1.1.
e.
In the Destination Address field, enter 192.168.1.2.
f.
Click Apply.
5. Assign an IPv6 address to the tunnel.
a. From the main menu, select Routing > IPv6 >Advanced>Prefix Configuration. A screen similar to
the following displays.
Figure 26-6
b. Select 0/7/1 in the Interface field.
Tunnel
v1.0, October 2009
26-5