NETGEAR Managed Switches Software Administration Manual, Release 8.0
a.
From the main menu, select Routing > RIP >Advanced > Interface Configuration. A screen similar
to the following displays.
Figure 28-8
b. Select 1/0/13 in the Interface field.
c.
Next to the RIP Admin Mode, select the Enable radio button.
d. Click Apply.
8.
Enable multicast globally.
a.
From the main menu, select Routing > Multicast >Global Configuration. A screen similar to the
following displays.
Figure 28-9
b. Next to the Admin Mode, select the Enable radio button.
c.
Click Apply.
9.
Enable PIM-DM globally.
PIM
v1.0, October 2009
28-10