NETGEAR FSM7328SNA Administration Manual page 202

NETGEAR Managed Switches Software Administration Manual, Release 8.0
a. Select acl_bpdu in the ACL Name field.
b. Enter the following information in the Rule Table.
• In the ID field, enter 2.
• Select the Permit in the Action field.
c. Click theAdd button.
4. Apply the ACL acl_bpdu to the port 2.
a. From the main menu, select Security > ACL >MAC ACL> MAC Binding Configuration. A screen
similar to the following displays.
Figure 11-47
b. Enter the following information in the MAC Binding Configuration.
• Select acl_bpdu in the ACL ID field.
• In the Sequence Number field, enter 1.
c. Click the Unit 1. The Ports display.
d. Click the gray box under port 2. A flag appears in the box.
e. Click Apply to save the settings.
11-42
v1.0, October 2009
Access Control Lists (ACLs)