NETGEAR Managed Switches Software Administration Manual, Release 8.0
a.
From the main menu, select Routing > VLAN > VLAN Routing Wizard. A screen similar to the
following displays.
Figure 11-29
b. Enter the following information in the VLAN Routing Wizard:
•
In the Vlan ID field, enter 48.
•
In the IP Address field, enter 192.168.48.1.
•
In the Network Mask field, enter 255.255.255.0.
c.
Click Unit 1. The ports display.
d. Click the gray box under port 48 twice until U displays. The U specifies that the egress packet is
untagged for the port.
e.
Click Apply to save VLAN 48.
3. Create VLAN 38 with IP address 10.100.5.34:
a.
From the main menu, select Routing > VLAN > VLAN Routing Wizard. A screen similar to the
following displays.
11-30
v1.0, October 2009
Access Control Lists (ACLs)