NETGEAR Managed Switches Software Administration Manual, Release 8.0
c.
Click Add. At the end of this configuration a screen similar to the following displays.
Figure 15-48
2. Configure a rule to allow the static client.
a.
From the main menu, select Security > Control > Dynamic ARP Inspection > DAI ACL Rule
Configuration.
b. Select ACL Name as ArpFilter.
c.
Enter Source IP Address as 192.168.10.2.
d. Enter the Source MAC Address as 00:11:85:EE:54:E9.
e.
Click Add. At the end of this configuration a screen similar to the following displays.
Figure 15-49
3. Configure ARP ACL used for the VLAN 1.
a.
From the main menu, select Security > Control > Dynamic ARP Inspection > DAI VLAN
Configuration.
b. Enter ARP ACL Name as ArpFilter.
15-42
v1.0, October 2009
Security Management