NETGEAR Managed Switches Software Administration Manual, Release 8.0
b. Click the tag VLANS, then logical VLAN interface 0/4/2 will be displayed.
c.
Select the checkbox for 0/4/2, and in the IPv6 Interface Configuration, select Enable in the IPv6
Mode field.
d. Click Apply.
6. Assign an IPv6 address to the routing VLAN.
a.
From the main menu, select Routing > IPv6 >Advanced>Prefix Configuration. A screen similar to
the following displays.
Figure 27-11
b. Select 0/4/2 in the Interface field.
c.
In the IPv6 Prefix field, enter 2000::1.
d. In the Length field, enter 64.
e.
Select Disable in the EUI64 field.
f.
Click Add.
IPv6 Interface Configuration
v1.0, October 2009
27-10