NETGEAR Managed Switches Software Administration Manual, Release 8.0
•
In the Subnet Mask, enter 255.255.255.0.
•
Select Enable in the Routing Mode field.
d. Click Apply to save the settings.
4.
Enable rip on the interface 1/0/10.
a.
From the main menu, select Routing >RIP >Advanced > Interface Configuration. A screen similar
to the following displays.
Figure 28-15
b. Select 1/0/10 in the Interface field.
c.
Next to the RIP Admin Mode, select the Enable radio button.
d. Click Apply.
5.
Enable rip on the interface 1/0/11.
a.
From the main menu, select Routing > RIP >Advanced > Interface Configuration. A screen similar
to the following displays.
Figure 28-16
b. Select 1/0/11 in the Interface field.
c.
Next to the RIP Admin Mode, select the Enable radio button.
d. Click Apply.
6.
Enable multicast globally.
PIM
v1.0, October 2009
28-14