NETGEAR Managed Switches Software Administration Manual, Release 8.0
5.
Enable rip on the interface 1/0/22.
a.
From the main menu, select Routing > RIP >Advanced > Interface Configuration. A screen similar
to the following displays.
Figure 28-65
b. Select 1/0/22 in the Interface field.
c.
Next to the RIP Admin Mode, select the Enable radio button.
d. Click Apply.
6.
Enable multicast globally.
a.
From the main menu, select Routing > Multicast >Global Configuration. A screen similar to the
following displays.
Figure 28-66
b. Next to the Admin Mode, select the Enable radio button.
c.
Click Apply.
7.
Enable PIM-SM globally.
28-47
v1.0, October 2009
PIM