NETGEAR Managed Switches Software Administration Manual, Release 8.0
e.
Enter Receiver Address as 192.168.10.2. A screen similar to the following displays.
Figure 20-7
f.
Click Apply. At the end of this configuration a screen similar to the following displays.
Figure 20-8
2.
Configure sampling ports sFlow receiver index, sampling rate, sampling max header size.
a.
From the main menu, select Monitoring -> sFlow -> Advanced -> sFlow Interface Configuration.
b.
Select the check box against the interface 1/0/1.
c.
Enter Sampling Rate as 1024.
d.
Enter Maximum Header Size as 64. A screen similar to the following displays.
Figure 20-9
SNMP
v1.0, October 2009
20-8