NETGEAR FSM7328SNA Administration Manual page 392

NETGEAR Managed Switches Software Administration Manual, Release 8.0
Here the max datagram size is default 1400. It can be modified to a value between 200 to 9116 using the
command sflow receiver 1 maxdatagram <size>.
(GSM7328S) #show sflow receivers
Receiver Owner Time out
Index String
-------- -------- ---------- ------------ ----- ------------------------------
1 NetMonit 31535988
2
3
4
5
6
7
8
(GSM7328S) #
Configure sampling ports sFlow receiver index, sampling rate, sampling max header size. It has to be
repeated for all the ports to be sampled.
(Netgear Switch) (Config)# interface 1/0/1
(Netgear Switch) (Interface 1/0/1)# sflow sampler 1
(Netgear Switch) (Interface 1/0/1)# sflow sampler rate 1024
(Netgear Switch) (Interface 1/0/1)# sflow sampler maxheadersize 64
View the sampling port configurations.
(GSM7328S) #show sflow samplers
Sampler
Data Source
----------- ---------------
1/0/1
Web Interface: Configuring Statistical Packet-based Sampling with sFlow
1. Configure the sFlow receiver IP address.
a. From the main menu, select Monitoring > sFlow > Advanced > sFlow Receiver Configuration.
b. Select the check box against 1.
c. Enter Receiver Owner as NetMonitor.
d. Enter Receiver Timeout as 31536000.
20-7
Max Datagram Port
Size
1400
0 1400
0 1400
0 1400
0 1400
0 1400
0 1400
0 1400
Receiver
Index
1
v1.0, October 2009
IP Address
6343 192.168.10.2
6343 0.0.0.0
6343 0.0.0.0
6343 0.0.0.0
6343 0.0.0.0
6343 0.0.0.0
6343 0.0.0.0
6343 0.0.0.0
Packet
Sampling Rate
-----------------
1024
Max Header
Size
------------------
64
SNMP