NETGEAR Managed Switches Software Administration Manual, Release 8.0
a.
From the main menu, select Routing > IPv6 >Basic>Global Configuration. A screen similar to the
following displays.
Figure 26-3
b. Next to the IPv6 Unicast Routing, select the Enable Radio button.
c.
Next to the IPv6 Forwarding, select the Enable Radio button.
d. Click Apply.
3.
Create a routing interface and assign IP address to it.
a.
From the main menu, select Routing > IP >Advanced>IP Interface Configuration. A screen similar
to the following displays.
Figure 26-4
b. Under IP Interface Configuration, scroll down to interface 1/0/1 and select the checkbox for that
interface. Now 1/0/1 appears in the Interface field at the top.
•
In the IP Address field, enter 192.168.1.1.
•
In the Subnet Mask field, enter 255.255.255.0.
•
Select Enable in the Routing Mode field.
c.
Click Apply.
26-4
v1.0, October 2009
Tunnel