NETGEAR FSM7328SNA Administration Manual page 183

NETGEAR Managed Switches Software Administration Manual, Release 8.0
2. Create VLAN 50 with IP address 192.168.50.1/24:
a. From the main menu, select Routing > VLAN > VLAN Routing Wizard. A screen similar to the
following displays.
Figure 11-23
b. Enter the following information in the VLAN Routing Wizard:
• In the Vlan ID field, enter 50.
• In the IP Address field, enter 192.168.50.1.
• In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1. The ports display.
d. Click the gray box under port 25 twice until U displays. The U specifies that the egress packet is
untagged for the port.
e. Click Apply to save VLAN 50.
3. Create VLAN 200 with IP address 192.168.200.2/24:
Access Control Lists (ACLs)
v1.0, October 2009
11-23