NETGEAR FSM7328SNA Administration Manual page 173

NETGEAR Managed Switches Software Administration Manual, Release 8.0
Figure 11-9
b. Enter the following information in the VLAN Routing Wizard:
• In the Vlan ID field, enter 100.
• In the IP Address field, enter 192.168.100.1.
• In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1. The ports display.
d. Click the gray box under port 13 twice until U displays. The U specifies that the egress packet is
untagged for the port.
e. Click Apply to save VLAN 100.
3. Create VLAN 200 with IP address 192.168.200.1/24:
a. From the main menu, select Routing > VLAN > VLAN Routing Wizard. A screen similar to the
following displays.
Access Control Lists (ACLs)
v1.0, October 2009
11-13