NETGEAR Managed Switches Software Administration Manual, Release 8.0
6.
Enable OSPF on the port 1/0/15.
a.
From the main menu, select Routing > OSPF > Advanced> Interface Configuration. A screen
similar to the following displays.
Figure 8-42
b. Under IP Interface Configuration, scroll down to interface 1/0/15 and select the checkbox for that
interface. Now 1/0/15 appears in the Interface field at the top.
•
In the OSPF Area ID field, enter 0.0.0.1.
•
Select the Enable in the OSPF Admin Mode field.
c.
Click Apply to save the settings.
7. Configure area 0.0.0.1 as a nssa area.
a.
From the main menu, select Routing > OSPF > Advanced> NSSA Area Configuration. A screen
similar to the following displays.
Figure 8-43
b. In the NSAA Area Configuration, in the Area ID field, enter 0.0.0.1.
c.
Click Add to save the settings.
OSPF
v1.0, October 2009
8-34