NETGEAR Managed Switches Software Administration Manual, Release 8.0
j.
Click Apply.
3. Add Rule 2.
a.
Enter Rule ID as 2.
b. Select Action as Permit.
c.
Select Protocol Type as TCP.
d. Enter Source Prefix as 2001:DB8:C0AB:AC11::.
e.
Enter Source Prefix Length as 64.
f.
Enter Destination Prefix as 2001:DB8:C0AB:AC13::.
g.
Enter Destination Prefix Length as 64.
h. Select Destination L4 Port as telnet. A screen similar to the following displays.
Figure 11-73
i.
Click Apply.
4. Add Rule 3.
a. Enter the Rule ID as 3.
b. Select Action as Permit.
c.
Select Protocol Type as TCP.
d. Enter Source Prefix as 2001:DB8:C0AB:AC11::.
e.
Enter Source Prefix Length as 64.
11-60
v1.0, October 2009
Access Control Lists (ACLs)