NETGEAR FSM7328SNA Administration Manual page 87

NETGEAR Managed Switches Software Administration Manual, Release 8.0
Web Interface: Creating Two VLANs
To use the Web interface to configure the managed switch, proceed as follows:
1. Create VLAN 10, VLAN20.
a. From the main menu, select Switching > VLAN >Advanced > VLAN configuration. A screen
similar to the following displays.
Figure 6-2
b. In the VLAN ID field, enter 10
c. In the VLAN Name field, enter VLAN10
d. Select Static in the VLAN Type field.
e. Click Add.
f. From the main menu, select Switching > VLAN >Advanced > VLAN configuration. A screen
similar to the following displays.
Figure 6-3
g. In the VLAN ID field, enter 20.
VLAN Routing
v1.0, October 2009
6-3