NETGEAR Managed Switches Software Administration Manual, Release 8.0
a.
From the main menu, select Switching > VLAN >Basic > VLAN configuration. A screen similar to
the following displays.
Figure 30-24
b. In the VLAN Configuration, VLAN ID field, enter 300
c.
Click Add.
2. Assign all of the ports to VLAN 300.
a. From the main menu, select Switching > VLAN >Advanced > VLAN Membership. A screen
similar to the following displays.
Figure 30-25
b. Select 300 in the VLAN ID field.
c.
Click the Unit 1. The Ports display.
d. Click the gray box under port 1 and 24 until U displays. The U specifies that the egress packet is
untagged for the port.
30-21
v1.0, October 2009
MLD