NETGEAR FSM7328SNA Administration Manual page 56

NETGEAR Managed Switches Software Administration Manual, Release 8.0
Create an IP subnet based VLAN 2000.
(Netgear Switch) #config
(Netgear Switch) (Config)#interface range 1/0/1-1/0/24
(Netgear Switch) (conf-if-range-1/0/1-1/0/24)# vlan participation include 2000
(Netgear Switch) (conf-if-range-1/0/1-1/0/24)#exit
(Netgear Switch) (Config)#
Have all the ports being member of the VLAN 2000.
(Netgear Switch) #show mac-addr-table vlan 2000
MAC Address Interface
-----------------
00:00:24:58:F5:56
00:00:24:59:00:62
Web Interface: Creating an IP Subnet Based VLAN
To use the Web interface to configure the IP subnet based VLAN, proceed as follows:
1. Create VLAN 2000.
a. From the main menu, select Switching > VLAN >Basic > VLAN configuration. A screen similar to
the following displays.
Figure 3-20
b. Enter the following information in the VLAN Configuration.
• In the VLAN ID field, enter 2000.
• Select Static in the VLAN Type field.
c. Click Add.
3-17
Status
--------- ------------
1/0/1 Learned
1/0/24 Learned
v1.0, October 2009
Virtual LANs