NETGEAR Managed Switches Software Administration Manual, Release 8.0
9.
Enable PIM-SM globally.
a.
From the main menu, select Routing > Multicast >PIM-SM->Global Configuration. A screen
similar to the following displays.
Figure 28-79
b. Next to the Admin Mode, select the Enable radio button.
c.
Click Apply.
10. Enable PIM-SM on the interface 1/0/21,1/0/22 and 1/0/24.
a.
From the main menu, select Routing > Multicast >PIM-SM->Interface Configuration. A screen
similar to the following displays.
Figure 28-80
b. Under PIM-SM Interface Configuration, scroll down to interface 1/0/21 and select the checkbox for
1/0/21. Then select the 1/0/22 and 1/0/24.
c.
In the PIM-SM Interface Configuration, select Enable in the Admin Mode field.
d. Click Apply to save the settings.
28-55
v1.0, October 2009
PIM