NETGEAR FSM7328SNA Administration Manual page 485

NETGEAR Managed Switches Software Administration Manual, Release 8.0
Figure 28-60
b. Select the 1/0/10 in the Interface field.
c. In the Hash Mask Length field, enter 30.
d. In the Priority field, enter 7.
e. Click Apply.
On Switch C:
To use the Web interface to config PIM-SM, proceed as follows:
1. Enable IP routing on the switch.
a. From the main menu, select Routing >IP >Basic >IP configuration. A screen similar to the
following displays.
PIM
v1.0, October 2009
28-44