NETGEAR Managed Switches Software Administration Manual, Release 8.0
(Netgear Switch) (Config)#interface 1/0/13
(Netgear Switch) (Interface 1/0/13)#routing
(Netgear Switch) (Interface 1/0/13)#ipv6 address 2001:2::1/64
(Netgear Switch) (Interface 1/0/13)#ipv6 enable
(Netgear Switch) (Interface 1/0/13)#ipv6 pimdm
(Netgear Switch) (Interface 1/0/13)#ipv6 ospf
(Netgear Switch) (Interface 1/0/13)#exit
On Switch B
Enable OSPFv3 to build unicast route table.
(Netgear Switch)#configure
(Netgear Switch) (Config)#ipv6 router ospf
(Netgear Switch) (Config-rtr)#router-id 2.2.2.2
(Netgear Switch) (Config)#exit
Enable ipv6 unicast routing on the switch.
(Netgear Switch) (Config)#ipv6 unicast-routing
Enable ipv6 MLD on the switch.
(Netgear Switch) (Config)#ipv6 mld router
Enable ipv6 PIM-DM on the switch.
(Netgear Switch) (Config)#ipv6 pimdm
Enable ip multicast forwarding on the switch.
(Netgear Switch) (Config)#ip routing
(Netgear Switch) (Config)#ip multicast
30-3
v1.0, October 2009
MLD