NETGEAR Managed Switches Software Administration Manual, Release 8.0
similar to the following displays.
Figure 23-3
b. Under VLAN Membership, select 200 in the VLAN ID field.
c.
Click Unit 1. The ports display:
•
Click the gray box under port 24 twice until U displays. The U specifies that the egress packet
is untagged for the port.
•
Click the gray box under port 48 once until T displays. The T specifies that the egress packet is
tagged for the port.
d. Click Apply to save the settings.
Double VLANs
v1.0, October 2009
23-4