NETGEAR FSM7328SNA Administration Manual page 53

NETGEAR Managed Switches Software Administration Manual, Release 8.0
a. From the main menu, select Switching > VLAN >Advanced > Protocol Based VLAN Group
Configuration. A screen similar to the following displays.
Figure 3-15
b. Enter the following information in the Protocol Based VLAN Group Configuration.
• In the Group Name field, enter vlan_ipx.
• Select IPX in the Protcol field.
• In the VLAN(1 to 4093) field, enter 4.
c. Click Add.
d. Assign the ARP protocol to the vlan_ip. A screen similar to the following displays.
Figure 3-16
a. Under Protocol Based VLAN Group Configuration, scroll down to vlan_ip and select the checkbox
for that group. Vlan_ip now appears in the Interface field at the top.
b. Select IPX in the Protcol field.
c. Click Apply.
3. Add the port 11 to the group vlan_ipx.
Virtual LANs
v1.0, October 2009
3-14