NETGEAR FSM7328SNA Administration Manual page 338

NETGEAR Managed Switches Software Administration Manual, Release 8.0
4. View the DHCP Snooping Binding table.
From the main menu, select Security > Control > DHCP Snooping Binding Configuration. A screen
similar to the following displays.
Figure 15-68
5. Enable IP Source Guard in the interface 1/0/2.
a. From the main menu, select Security > Control > IP Source Guard > Interface Configuration.
b. Select the check box for interface 1/0/2.
c. Select IPSG mode as Enable.
d. Click Apply. At the end of this configuration a screen similar to the following displays.
Figure 15-69
6. IP Source Guard Static Binding
a. From the main menu, select Security - Control > IP Source Guard > Binding Configuration.
b. In the Static Binding Configuration table, select interface as 1/0/2.
c. Enter MAC Address as 00:05:05:05:05:05.
d. Select VLAN ID as 1.
e. Select IP Address as 192.168.10.80.
15-54
v1.0, October 2009
Security Management